(833) 3-COAT ITservice@coatingshub.com

SK-P250┃Acrylic Urethane┃Sealer

Starting at: $98.25

Related Documents
Technical Data Sheet
  • 1.5 Gal Kit
  • 15 Gal Kit
  • Clear
  • Satin

SK-P250 is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The use
of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete.

SK-P250 is U.V. stable for use in exterior applications, cures rapidly and is easily recoated with both solvent-based and water-based polyurethanes.

When used as a finish coat, this material gives a hard, high gloss surface that offers excellent stain resistance and easy cleanability. Compared to solvent-based acrylic sealers, SK-P250 offers substantial improvements in initial gloss, gloss retention and overall performance. SK-P250 is available in a satin finish if a lower gloss is desired.

A special version (SK-P250 VOC) of this material is available to meet the 50 grams/liter VOC limit in California.

Scroll to Top