Key Features:
- Natural gray to blend with existing concrete
- Ease of placement, with variable water ratios
- Mapecem Quickpatch can be applied from 1/16″ to 1-1/2″ (1,5 mm to 3,8 cm) neat and from 1-1/2″ to 3″ (3,8 to 7,5 cm) neat in areas no larger than 24 sq. ft. (2,23 m2). Larger areas will require Mapecem Quickpatch to be extended.
- Mapecem Quickpatch can be primed and covered with a leveler, a cement- based overlay or a tile-setting mortar in as little as 90 minutes, depending on temperatures.
- Moisture-controlling adhesives or moisture mitigation systems can be used over Mapecem Quickpatch in as little as 16 hours.
- Floor coverings can be installed in as little as 16 hours after application as long as the existing subfloor meets the requirements of the mortars or adhesives used for installation.
Uses & Applications:
- For patching of interior/exterior concrete surfaces
- For smoothing, including elevation changes by ramping
Coverage*:
| Amount of Product at 1/4″ (6 mm) thickness | Coverage |
| 10 lbs. (4,54 kg) | 4 to 5 sq. ft. (0,37 to 0,46 m2) |
| 25 lbs. (11,3 kg) | 10 to 12 sq. ft. (0,93 to 1,11 m2) |
| 50 lbs. (22,7 kg) | 20 to 24 sq. ft. (1,86 to 2,23 m2) |
* Coverage shown at maximum water is for estimating purposes only. Actual jobsite coverage may vary according to substrate conditions and setting practices.
