fbpx

Coatings Hub

#DontBeLimited

NOTICE : Due to a recent severe shortage in raw materials and immediate price increases, prices may change without notice. We are unable to honor online prices for products that have received immediate increases. We apologize for any inconvenience, all prices will be discussed with you before taking payment.

Floropoxy MVT Primer

$232.20

Florock Economical, 100% solids, alkali-resistant epoxy primers that provide superior thin film protection over concrete surfaces ranging from lower to very high moisture vapor transmission challenges.

Actual Area (sq. ft.)
Total Price

Floropoxy MVT Primer is a two component, 100% solids alkali resistant epoxy primer that provides superior protection to concrete surfaces subjected to MVT.

Packaging:

  • 3 Gallon Kit
  • 15 Gallon Pail Set

Storage:

All containers should be stored at 40° F to 95° F and be kept tightly sealed and out of direct sunlight.

Typical Uses & Applications:

Ideally suited for priming in commercial, industrial and institutional applications where Moisture Vapor Transmission may be an issue such as:

  • Aircraft Hangars
  • Chemical and waste treatment plants
  • Detention facilities
  • Hospitals
  • Manufacturing plants
  • Metal finishing and power generation facilities
  • Warehouses

Product Advantages:

  • Provides a primer that is highly resistant to MVT found on concrete substrates
  • Solvent free
  • 100% Solids
  • For Interior use
  • USDA, FDA, OSHA, EPA Compliant
  • Part of the FloroProof MVT Mitigation System
Packaging

3 gal (Kit), 15 gal, 165 gal

Find data sheets, color charts, manuals, brochures, installation guides and more from product manufacturers.
Data Sheets
Coverage will vary depending on condition of surface and desired thickness.
PackagingCoverage Rate
3 gal kit480 sq. ft. / kit
15 gal kit2,400 sq. ft. / kit
165 gal (Drum)26,400 sq. ft. / Drum
*Based on coverage rate of 160 sq. ft. / gal.
  • For up to 6 pounds of MVT, spread at 160 sq. ft. / gal for a 10 mil film
  • For up to 8 pounds of MVT spread at 100 sq. ft. / gal for a 16 mil film (2-8 mil coats may be necessary)Note: Higher limits may be available upon request based on a complete review by the Florock technical department.

MVT = Moisture Vapor Transmission 

×





Scroll to Top