FloroCrete P is a solvent free, low odor primer for use with other FloroCrete systems. It allows moisture to move through it at a safe rate and can be installed at a thickness of 5 mils to 10 mils (127 microns to 254 microns).
- CA 01350 Air Quality Compliant
- ADA Compliant
- LEED Credits Available
- Meets FDA, USDA & CFIA Standards
- VOC Compliant/Low Odor
- Thermal Shock Resistant
- Heat Resistant to 235º F
- Contains Antimicrobial Additive
- Tolerates Dampness
- High Chemical & Abrasion Resistance
- Can Be Applied to 7 to 14 Day Old Concrete
Typical Uses/Applications: FloroCrete P may be used as a part of the Florock FloroProof Moisture Mitigation System (contact your Florock representative for details). It is also used to prime under FloroCrete SLX, RT and HD when the concrete substrate is porous, and under FloroCrete SLX, when installed without a broadcast. FloroCrete P is an ideal primer for a variety of commercial, industrial and institutional applications such as:
- Commercial Kitchens/ Fryer Areas
- Vehicle Service Areas
- Food Processing Plants
- Breweries, Wineries & Dairies
- Walk-In Coolers & Freezers
- Bottling Facilities
- Suitable for Indoor & Outdoor Use
- Chemical Processing
- Sanitation & Wash-Down Areas
Coverage: Apply FloroCrete P at a 5 mil to 10 mil thickness (127 microns to 254 microns). Each kit will cover 312 SF at 10 mils or 624 SF at 5 mils (29.0 m2 at 254 microns or 58.0 m2 at 127 microns).
Cure Time: The chemical curing of FloroCrete is affected by temperature. At 70° F (21o C) curing temperature, expect to walk on the floor in 12 hours, with full traffic after 24 hours. At 45° F (7o C) curing temperature, allowing foot traffic may take 48 hours or longer; therefore, it is imperative that air and substrate temperatures be kept above 70° F (21o C) for best cure.