Epoxy 200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short recoat times and good low-temperature curing. This material has little odor, applies easily and adheres to damp concrete.
Epoxy 200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Recoat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used. Epoxy 200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. Epoxy 200 primer with Polyurethane 100 or Polyurethane 501 top coats may be accomplished in one trip to the jobsite. Fewer trips to the jobsite result in reduction of labor costs.